What is the unit of U3 in Abaqus in the result. degree or radian? I performed quasi-static analysis on gears in ABAQUS. After analysis, I extracted the U3 parameter to measure the gear ABAQUS Scripting Reference Manual u1. A Float, a Complex, or a SymbolicConstant specifying the displacement component in the 1-direction. Note: Although u1, u2, u3, ur1, ur2, and ur3 are optional arguments, at least one of them must be specified. u2. A Float, a Complex, or a SymbolicConstant specifying the displacement component in the If you model the part with generalized plane strain elements, you must use the Keywords Editor to apply boundary conditions on the active degrees of freedom (U3, UR1, and UR2) at the reference node of these elements (see Adding unsupported keywords to your Abaqus/CAE model). Abaqus/CAE Usage Load module: Create Boundary Condition: Step: Initial Using the direct format You can choose to enter the degrees of freedom to be constrained directly. Input File Usage Either a single degree of freedom or the first and last of a range of degrees of freedom can be specified. To edit an existing base motion boundary condition using menus or managers, see Editing step-dependent objects. In the Basic tab, select the Degree-of-freedom to specify the direction for which the base motion is being defined. This direction is always a global direction: U1, U2, U3, UR1, UR2, or UR3. A list of the boundary conditions used in ABAQUS. U1, U2 and U3 specify movements along Table 1. UR2 and UR3 specify rotation about the x, y and z axes, respectively. Xebj.

abaqus u1 u2 u3 meaning